ralston metal logo

Double Door Enclosure


Water & Dust Tight Double Door Enclosure



Ralston’s N4-DD enclosures are applied indoors and outdoors to house such items as: electronic controls, instrumentation systems, pneumatic, hydraulic and machine tool controls.


These enclosures are designed to provide protection against dust, dirt, oil and water. They are for areas such as dairies and breweries where they are subject to frequent high pressure hosing and generally wet conditions. (Not submersible)



All N4 Double Door enclosures are made from 12 ga. hot rolled steel and have continuously welded seams ground to a smooth finish. The N4-DD enclosure has a folded lip around the door opening to provide complete and maximum gasket contact and to prevent liquids from dripping into the enclosure when the door is open.


Each enclosure is equipped with 1/4-20 grounding studs, and two 5/8 eye bolts complete with solid rubber seals and reinforcing support angles welded to the top of the enclosure.The N4-DD enclosure is equipped with wall mounting brackets and body stiffeners. Each enclosure comes complete with a removable full length 12 ga. back panel mounted on 3/8 collar studs and has two support brackets welded to the bottom of the enclosure to aid in panel installation.


Each enclosure's door is equipped with urethane gasket, a removable print pocket, 1/4-20 grounding studs, stainless steel door clamping hardware on three sides and padlocking hasp. Each door rests on a removable centre mullion which also provides for easy panel installation. Doors are easily removed by pulling the pin on the continuous stainless steel piano hinge.


Paint Finish

All enclosures are phosphatized and finished inside and out with ANSI/ASA 61 grey polyester powder coating. Inner back panels are painted with high gloss white powder coatings.



N4-DD enclosures are built to the requirements of NEMA type 12 specifications for use with industrial control equipment in ordinary locations, type 13 for an oil and dust tight enclosure, and type 4,4X as a water tight corrosion resistant enclosure.


Special Orders

Custom units made from stainless steel or with special finishes, sizes or punching can be supplied on order.


N4-DD enclosures are CSA certified type 4,4X (File #LR 1174410)


N4-DD enclosures are UL 508 listed type 4 (File #E136838)

Part Number Height Width Depth Weight
N4-DD-604810 60.00 in 48.00 in 10.00 in 384.00 lbs
N4-DD-606012 60.00 in 60.00 in 12.00 in 466.00 lbs
N4-DD-726012 72.00 in 60.00 in 12.00 in 548.00 lbs
N4-DD-727212 72.00 in 72.00 in 12.00 in 656.00 lbs
N4-DD-727224 72.00 in 72.00 in 24.00 in 788.00 lbs